MCS3-SP-RS422 Compact Jog/Shuttle Controller Users Manual
10Track Arming The MCS3-SP sends the appropriate commands for track arming analog and digital machines. When the unit is powered on, it defaults to t
Technical Information Specifications Dimensions: 6.5” x 7” x 3" 165.10 mm x 177.80 mm x 76.20 mm Weight: 1.81 Kg. 4 lbs. Power: 9 volts
12MCS3-SP Pinout The following table details the pinout of the MS3-SP in machine mode and in host modes. U3 position “To Host” “To Mach” 1 Ground
13Machine Mode Commands The following table details the implementation of the 9 pin/P2 protocol in the MCS3-SP. Stop 20 00 20 Play 20 01 21 Record 2
14Specifications Electrical: Operating voltage 100 – 240 Volts AC, 50 – 60 Hz, 0.45 Amps maximum Signal Interface RS-422A 2 meter attached cabl
15JLCooper Electronics Limited Factory Warranty JLCooper Electronics ("JLCooper") warrants this product to be free of defects in materials
2 MCS3-SP-RS422, MCS-3800, MCS-3400 and MCS-3000 are trademarks of JLCooper Electronics. All other brand names are
3Table of Contents Introduction... 4 Installation...
Introduction Thank you for purchasing the MCS3-SP. The JLCooper MCS3-SP Media Control Station is a remote control device for use with Avid Symphony r
Installation Configuring the MCS3-SP The MCS3-SP can operate in either of two modes, as a computer controller, meant to be attached to a computer bas
6Connecting the MCS3-SP to a Deck Connect the supplied external power supply to the power jack on the MCS3-SP captive cable. In case a replacement su
Using the MCS3-SP Using the MCS3-SP with a deck Transport Functions The transport buttons control Rewind, Fast Forward, Stop, Play, and Record. Press
8Jog and Shuttle Functions The MCS3-SP has a professional jog/shuttle mechanism that incorporates the Jog and Shuttle into a single knob. To change
9V-Stick Functions The “V-Stick” is located to the upper right of the jog/shuttle control. It is a soft, four position switch. The switch is activat
Comments to this Manuals