Jlcooper ES-4/100 MIDI User Manual

ES-4/100 & ES-8/100 MIDI Desktop Automation Controllers Users Manual Second Edition

10Function Select The Fader buttons can produce various actions in your application. Typically, the Fader buttons can be set to perform a SELECT, SO

Using the ES-4/100 and ES-8/100 with Pro Tools Some current software packages do not directly support the ES-4/100 and ES-8/100. You can still use y

Select the MIDI Controllers tab. Select a peripheral and click on HUI. Then, select the MIDI ports that the ES-4/100 or ES-8/100 is connected to

13Technical Information Communication Communications with the MIDI unit follows the MIDI specification. Faders When a fader is moved, the ES-4/100

14Note: Since there are only four physical faders, reception of a fader position command for a fader not selected on the current bank will be stored

15 Mute 46h Solo 47h Aux 48h Select 49h As with the faders, the same message format is used illuminate the LEDs above the faders. Note: Since the

16Troubleshooting The ES-4/100 and ES-8/100 is a rather straightforward device that does not require any programming to setup. The unit works right

17JLCooper Electronics Limited Factory Warranty JLCooper Electronics ("JLCooper") warrants this product to be free of defects in materials

2 ES-4/100 and ES-8/100 MIDI Automation Controllers User’s Manual, Second Edition, Part Number 932495 Copyright ©2010 JLCoope

3Welcome Thank you for purchasing the ES-4/100 or ES-8/100. Continuing in the tradition of JLCooper’s FaderMaster Professional, the ES-4/100 and ES-

4Table of Contents Welcome ... 3 Introduction...

5Introduction The ES-4/100 and ES-8/100 are 8-channel automation controllers. They can control stand -alone MIDI equipment or, computer-based appli

Controls 6 2 3 4 1 Figure 1 – Control Location

7 1. Faders Prominently featured on the top panel of the unit are four or eight 100mm, touch sensitive, motorized faders. Because the faders are mot

8Installation Unpacking When unpacking the unit please keep the original packaging in the event the unit needs to be shipped. The unit is packed wit

9have a HUI emulation mode that is compatible with Pro Tools and other applications that support the HUI controller. Operation Faders Since there ar